Auto Batch Pre-Expander Machine
It adopts PLC programmable controller and touch screen control,automatic feeding,automatic electronic measurement,automatic control of temperature and pressure,dry barrel drums,etc.,make the material
1.It adopts PLC programmable controller and touch screen control,automatic feeding,automatic electronic measurement,automatic control of temperature and pressure,dry barrel drums,etc.,make the material once completed,to ensure that the machine automatically cycle of production.
2.The use of electronic weighing systems,photoeletric material level control system,proper grasp bulk density foam material,so that a uniform density foam beads after each error is less than 3% or less.
3.Barrel body temperature and vapor pressure,the use of advanced high-precision Japanese pilot value control,ensure that the pressure relief value outlet is always constant,ensure that the temperature inside the tank advanced machine control within±1%℃ of,so as to ensure the consistency of raw EPS issued prevent EPS material because the temperature control is not good agglomeration.
4.Automatic vacuum feeding device,electronic weighing devices,combined with level switch to automatic feeding,improved production efficiency,reduce labor intensity.
5.The barrel constant use of closed foam,high thermal efficiency,save steam energy than the continuous advanced machines save more than 50%.
6.The aircraft is equipped with a high quality enclosed hot air drying system,good raw material in the barrel body hair dry,without going through a long curing dry bed.Weighing system on top of the barrel,so the small footprint and compact machine structure.
7.The machine uses electrical,pneumatic components,values,etc.,are well-known brand products,thus ensuring the operation of the machine stability,reliability and long service life.
8.Automatic discharge barrel using compressed air to blow the material,increase the feed rate.
9.The computer has a memory function,can reserve the mark,mode,foam technology and data of the EPS raw material manufacturer in the computer.You can just press the touch screen to get the data you’ve used of the former manufacturer’s raw material,and the machine will come back to the former process.
10.The machine is suitable for foaming production in high attitude areas.
|Drainge||Upper drain port||Inch||5"(DN125)||6"(DN150)|
|The drainage outlet||Inch||4"(DN100)||5"(DN125)|
|Material conveying line||Inch||8"(DN200)||8"(DN200)|