PRODUCTS
EPS Automatic Cutting Line
Description
EPS Automatic Cutting Line
Offer No.:
Important: D&T EPS Machinery would reserve the right for this proposal.
Without written permission, please do not disclose the price and content to the third party
Dear Sir or Madam
First of all, thanks very much for your interest in D&T EPS Machinery.
D&T EPS Machinery mainly focus on EPS Automatic plant design, machinery and engineering. To save labor & energy cost for customer. If more information needed, please login www.epsmachinery.cc for details.
In the following you would find the introduction and the requested offer for EPS Cutting Line. In case you have any questions, please don’t hesitate to contact us by +86-13588377998
Best regards
1. General Description
Features:
Full automatic, big capacity and save labor cost
Layout for the line:
2. Technical data
Suitable for
block length：4000mm
block width： 1250mm
block height：640mm
Cutting speed：0~3m/min
Oscillation：15mm
Max. Wires in horizontal：55 pieces
Max. Wires in vertical： 6 pieces
Max. Wires in cross： 15 pieces
Min. Thickness in horizontal ：20mm
Air pressure ：6 bar
55 wires setting time：3min
Voltage ：380V/50Hz*Customized
Total Power： 50Kw
Auto wire setting in horizontal： include
Oscillation cut in horizontal ： include
Wire end cooling in horizontal： include
Wire end cooling in vertical ： include
Wire end cooling in cross： include
Scrape recycle for six sides ： include
Wire setting in vertical： manually
Wire setting in cross ：manually
3. Details
3.1 Block storage line & protective fence (Protective fence provided by buyer)
Made of steel tube and rollers, 5 or 6 blocks can be stocked here and ready for cut.
3.2 Hydraulic block tilter
Enable EPS block from vertical to horizontal, hydraulic operation, safe and steady
3.3 Automatic Alignment system in horizontal
It keeps EPS block in machine middle position, to get best cutting precision
3.4 High precision automatic wire Position for Horizontal Cutting
55 wires can be set within 3 minutes, thickness Tolerance ± 0.25mm.
Fast wire setting helps to save wire setting time hugely.
Cooper parts are used for electricity conduction, to insure excellent conduction property.
It is extremely good for EPS block cutting surface.
Three different kind of thickness can be set in one cut.
There are two fans on each side to cool wire ends
Oscillation cut frequency in horizontal is changeable depends on block density And moisture content.
3.5 Vertical Cutting
Oscillation cut speed is fixed on vertical, increasing approx. 30% cutting speed.
There is one blower on top and one blower on bottom, to cool the wire ends.
3.6 Cross Cutting
The cutting frame moves up and down, the wires installed on the frame cut EPS block to different length. Maximum 15 wires can be manually set in cross cutting.
On both sides, there are block alignment, to insure the cutting precision
3.7 Scrape Recycle System
Scrape collection belt, it collects all scrape on this transportation belt.
Protective fence for scrape collection.
It helps the scrapes drop on the belt perfectly.
Then the belt would transport all scrape to the end crusher.
Related Products
Ready to Discuss a Project?
Fill Out the Form or Email us at
